Type de Système de Stockage: | LFP (LiFePO4) |
---|---|
Capacité Nominale: | 60 Ah |
Région: | Chine |
Rechargeable Batteries pack
Battery Type: LiFePO4
Application: Solar Energy Storage Systems
No. de Modèle |
|
|
---|---|---|
Spécification | ||
Système de Stockage Catégorie | Autonome | |
Type de Système de Stockage | LFP (LiFePO4) | |
Fiche Technique de la Batterie | ||
Caractéristiques électriques | ||
Tension Nominale |
|
|
Capacité Nominale |
|
|
Courant de Décharge Max. |
|
|
Courant de Charge Max. |
|
|
Paramètres de Température | ||
Température de Charge | -0 ~ +45 ℃ | |
Température de Décharge | -20 ~ +60 ℃ | |
Température de Stockage | -0 ~ +40 ℃ | |
Données Générales | ||
Dimensions (L*L*H) |
|
|
Poids |
|
Resistance to heavy loads. The battery pack shall be tested according to the regulations and shall not ignite or explode
Resistance to thermal shock The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-overcharge. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to overdischarge. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to short circuit The battery module shall be tested according to the regulations and shall not ignite or explode
High temperature storage. The battery shall be tested according to the regulations and shall not leak smoke, catch fire or explode
Ant-heating.The battery module is tested according to the regulations. No part of the explosion battery penetrates the screen, and some or all of the batteries protrude from the screen.
Anti-puncture. The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-extrusion. The battery module shall be tested according to the regulations and shall not ignite or explode
Resistance to low pressure. The battery pack shall be tested in accordance with regulations and shall not leak smoke, catch fire or explode.
11.Constant damp heat, After the battery pack is tested according to the regulations, its appearance shall be free from obvious deformation, rust smoke or explosion, and its capacity shall not be less than 90% of the rated value.
12.Anti-vibration. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally.
13) Ant-collision. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally
14) Temperature cycling. The battery pack shall be tested in accordance with the provisions of 6.6.15 which shall not leak, smoke, ignite or explode; the appearance of the battery pack shall be free of cracks, no loss of quality, and the capacity shall not be lower than 70% of the initial state.
15) Flame retardant properties. For battery packs with plastic casing and protective cover, the test shall be carried out in accordance with the provisions of 6.6.16. The outer casing shall comply with the provisions of Article 8.3.2 of the GB/T2408-2008, FH-1 (horizontal level) and 9.3.2 of FV-0 (vertical).Level) requirements.
16) insulation resistance. For a battery pack with a metal case, the insulation resistance of the battery pack's metal and cathode housings is not less than 2 MW.
Turnkey solution for battery manufacturing
Battery factory designing,battery designing and assembly solutions
ODM/OEM finished batteries
Design and solution of lithium battery to replace leadacid battery
Household photovoltaic energy storage system
Industrial and commercial photovoltaic energy storage system
Zero-carbon solutions
Better Technology Group Limited est est un opérateur mondial de solutions intégrées de fabrication de batteries, et son champ d'activité actuel couvre près de 120 pays et régions à travers le monde.
La société propose les produits et services suivants :
1. Solution clé en main pour la fabrication de batteries ;
2. Conception d’usine de batteries, conception de produits de batteries et outillage ;
3. Batterie finie ODM/OEM ;
4. Conception et schéma de la batterie plomb-acide au lithium ;
5. Système de stockage d’énergie photovoltaïque domestique ;
6. Systèmes de stockage d’énergie photovoltaïque industriels et commerciaux ;
7. Nouvelles solutions énergétiques zéro carbone ;
Our Services
Turnkey solution for battery manufacturing
Battery factory designing,battery designing and assembly solutions
ODM/OEM finished batteries
Design and solution of lithium battery to replace leadacid battery
Household photovoltaic energy storage system
Industrial and commercial photovoltaic energy storage system
Zero-carbon solutions
Project service
Integrated solution operator for global battery manufacturing