Type: | TOPCon |
---|---|
Gamme de Puissance: | 570 ~ 585 Wp |
Région: |
Chine
![]() |
High Efficiency - Efficiency of up to 22.00%
Positive Tolerance - Power tolerance of 0 to +5W
Strong Load Capacity - 2400Pa wind loads and 5400Pa Snow loads
Reliable Quality - International QS ISO9001
Higher Weatherproof Rating - Protection rating to IP68
Salt and Corrosion Resistant
Anti-PID - Highly PID resistant in larger humidity areas
No. de Modèle |
|
||||
---|---|---|---|---|---|
Garantie | |||||
Garantie | 15 Années | ||||
Garantie de Puissance | 30 ans à 87% de puissance sortie | ||||
Caractéstique Electrique (STC) | |||||
Puissance Maximal (Pmax) |
|
||||
Tension à Puissance Maximal (Vmax) |
|
||||
Courant à Puissance Maximum (Cmax) |
|
||||
Tension Circuit Ouvert (Voc) |
|
||||
Courant Circuit Court (lsc) |
|
||||
Efficacité Module |
|
||||
Tolérance de Puissance (+) |
|
||||
Conditions de Test Standard (STC): masse d'air AM 1,5, irradiation 1000W/m2, température des cellules 25°C | |||||
Caractéristique Electrique en NOCT | |||||
Température | 45±2 °C | ||||
Température Nominale des Cellules (NOTC): 800W/m2, AM 1,5, vitesse du vent 1m/s, température ambiante 20°C | |||||
Caractéristique de Température | |||||
Gamme de Température | -40~85 °C | ||||
Coefficient Température (Pmax) | -0,3 %/°C | ||||
Coefficient Température (Voc) | -0,25 %/°C | ||||
Coefficient Température (lsc) | 0,046 %/°C | ||||
Caractéristiques Maximum | |||||
Tension Maximale du Système | 1500 V | ||||
Caractéristiques Fusibles en Série | 25 A | ||||
Caracteristiques Matériel | |||||
Dimension Module | 2278x1134x35 mm | ||||
Poids | 27,2 kg | ||||
Type Cellule | TOPCon | ||||
Taille Cellule | 182x182 mm | ||||
Numéro Cellule | 144 | ||||
Epaisseur du Verre | 3,2 mm | ||||
type de Trame | Alliage Aluminium Anodisé | ||||
Protection Boîte de Jonction | IP 68 | ||||
Type de Connecteur | MC4 | ||||
Section de Câble | 4 mm2 | ||||
Longeur Câble | 300 mm |
GEP-Solar Manufacturing specialized in the design, development, and production of high-efficiency PV modules, based on lower LCOE systems for our global market network. We offer a wide range of PV modules, PV ribbons and busbars, and PV conductive silver paste, following PV Industry Tier-1 Requirement Standards.
Green Technology
New generation PV cell welding machines, with a daily power output of 10.57 megawatts and multifunctional module processing.
Our PV Modules production unit covers more than 60,000 square meters dispatched into 15 different manufacturing lines.
GEP High-Tech welding machine can perform well using M6 or M10 cells type, which constitutes a potential gain of time particularly when it comes to faster delivery time.
We provide responsive products, engineering, and flexible Procurement Solutions, to support our partners in their organizational objectives.
GEP-Solar Manufacturing specialized in the design, development, and production of high-efficiency PV modules, based on lower LCOE systems for our global market network. We offer a wide range of PV modules, PV ribbons and busbars, and PV conductive silver paste, following PV Industry Tier-1 Requirement Standards.
Production
Green Technology
New generation PV cell welding machines, with a daily power output of 10.57 megawatts and multifunctional module processing.
Our PV Modules production unit covers more than 60,000 square meters dispatched into 15 different manufacturing lines.
GEP High-Tech welding machine can perform well using M6 or M10 cells type, which constitutes a potential gain of time particularly when it comes to faster delivery time.
We provide responsive products, engineering and flexible Procurement Solutions, to support our partners in their organizational objectives.
Projects