Type: | Polycristallin |
---|---|
Gamme de Puissance: | Wp |
Région: | Chine |
No. de Modèle |
|
|||||
---|---|---|---|---|---|---|
Garantie | ||||||
Garantie | 10 Années | |||||
Garantie de Puissance | 25 ans à 84,8% de puissance sortie | |||||
Caractéstique Electrique (STC) | ||||||
Puissance Maximal (Pmax) |
|
|||||
Tension à Puissance Maximal (Vmax) |
|
|||||
Courant à Puissance Maximum (Cmax) |
|
|||||
Tension Circuit Ouvert (Voc) |
|
|||||
Courant Circuit Court (lsc) |
|
|||||
Efficacité Module |
|
|||||
Tolérance de Puissance (+) |
|
|||||
Conditions de Test Standard (STC): masse d'air AM 1,5, irradiation 1000W/m2, température des cellules 25°C | ||||||
Caractéristique Electrique en NOCT | ||||||
Température | 42±2 °C | |||||
Température Nominale des Cellules (NOTC): 800W/m2, AM 1,5, vitesse du vent 1m/s, température ambiante 20°C | ||||||
Caractéristique de Température | ||||||
Gamme de Température | -40~85 °C | |||||
Coefficient Température (Pmax) | -0,36 %/°C | |||||
Coefficient Température (Voc) | -0,304 %/°C | |||||
Coefficient Température (lsc) | 0,05 %/°C | |||||
Caractéristiques Maximum | ||||||
Tension Maximale du Système | 1500 V | |||||
Caractéristiques Fusibles en Série | 15 A | |||||
Caracteristiques Matériel | ||||||
Dimension Module | 1650x992x35 mm | |||||
Poids | 18,3 kg | |||||
Type Cellule | Polycristallin | |||||
Numéro Cellule | 60 | |||||
Epaisseur du Verre | 3,2 mm | |||||
type de Trame | Aluminium Anodisé | |||||
Protection Boîte de Jonction | IP 68 | |||||
Type de Connecteur | MC4 | |||||
Section de Câble | 4 mm2 | |||||
Longeur Câble | 900 mm |
GEP-Solar Manufacturing specialized in the design, development, and production of high-efficiency PV modules, based on lower LCOE systems for our global market network. We offer a wide range of PV modules, PV ribbons and busbars, and PV conductive silver paste, following PV Industry Tier-1 Requirement Standards.
Production
Green Technology
New generation PV cell welding machines, with a daily power output of 10.57 megawatts and multifunctional module processing.
Our PV Modules production unit covers more than 60,000 square meters dispatched into 15 different manufacturing lines.
GEP High-Tech welding machine can perform well using M6 or M10 cells type, which constitutes a potential gain of time particularly when it comes to faster delivery time.
We provide responsive products, engineering and flexible Procurement Solutions, to support our partners in their organizational objectives.
Projects