Annuaire Panneaux Solaires
(12 358 Séries panneaux / 46 175 Panneaux)

● Une des entreprises les plus innovantes

● R&D basé aux USA

● Les cellules 5BB/9BB/12BB peuvent réduire les pertes de chaleur

● Tension de 1 500V, faible coût BOS

● Meilleur rendement lumineux

● Rendement énergétique accru

● Robuste/sûr sous le vent/neige

● Résistant sel/ammoniac

● Rendement linéaire garanti 25 ans

Higher module efficiency and higher output power

Innovative half-cell and PERC technology

Better shade tolerance and reduced internal mismatch loss

High performance under low light conditions

TUV, CQC, and CE Certified

Harsh Environment Adaptability

Passed PID, fire, salt mist corrosion, and ammonia corrosion tests

• Crafted with the most advanced technologies

• Our modules can reach up to an impressive 22,54% peak efficiency

• Powered with N-type half-cut monocrystalline cells

• Output power ranging from 425 to 440watts

• Double glass

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

• Achieves up to 22% efficiency

• Power tolerance ranging from 0 to +5W

• Withstands 2 400Pa wind loads and 5 400Pa snow loads

• Complies with international QS ISO9 001 standards

• Boasts a protection rating of IP68

• Resilient Against Salt and Corrosion

• Highly resistant to PID in humid conditions

• Cellule solaire à barres M

• Rendement élevé

• Résistance PID

• Performance en cas de faible luminosité

• Durabilité dans des conditions environnementales extrêmes

9 Busbars Solar Cells

Power Output Of Up to 455Wp and 20,3% efficiency

PID Resistant

Excellent Low-light Performance

Severe Weather Resilience

Durability against extreme environmental conditions

Improved Temperature Coefficient

• Zero LID

• Anti-PID

• Resistant to harsh environments

• Lower temperature coefficient(-0,29%/℃)

• Excellent low irradiance performance

• 80%-85% bifaciality and up to 30% power gain from the back side

• Lower BOS and LCOE

• HJT 2,0 Technology

• -0,26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant

• Quality Management System and Product Certification

IEC61 215，61 730 certified

Lower hot spot risks

Lower Pmax temperature coefficient

Lower LCOE for shorter payback period

Excellent anti-PID performance

Mechanical loading 5 400Pa and Wind loading 2 400Pa

Up to 20 years product warranty terms and 30 years power warranty

High-quality the YH450 module series

The series has 4 models with a maximum power output of 450W and a peak efficiency of 20,7%

Equipped with 144 half-cut solar cells

Resistant to potential induced degradation effects

Passed salt mist, ammonia corrosion, and electroluminescence tests

Durable design - an anodized aluminium alloy frame and a 3,2mm tempered glass

• MBB PERC half-cut cell technology

• Anti-PID capabilities

• Outstanding performance in low-light conditions

• Increased mechanical load capacity

• Exceptional reliability

The high module conversion efficiency of up to 21,28% by using innovative half-cell design and multi-busbar (MBB) cell technology

144 monocrystalline cells encased in a durable anodized aluminium frame

The module has passed the salt mist, ammonia and hail tests

The anodized aluminium frame allows the panel to withstand wind loads up to 2 400 Pa, and snow loads up to 5 400 Pa

• Up To 21,7% High Efficiency

• Enhanced Power Output With Optimized Module Layout

• Superior Performance With Anti-LeTID, Anti-PID, And Hot-Spot Protect Technologies

• Certified For High Snow (5 400 Pa) And Wind Loads (3 000 Pa)

• Excellent Low-Light And Temperature Behavior For Consistent Energy Yield

- EVA encapsulated

- Glass foil sandwich laminated

- Sandblasted anodizing Aluminum frame

- IEC 5 400Pa tested

- Hail up to 25mm diameter, 80 Km/h tested

- Temperature Range: -40 to +85 ℃

- Nominal operating cell temperature (NOCT): 47℃

• Mono PERC Cells with Half-cut Technology

• Higher Power Output

• PID Resistant

• High Efficiency up to 21,1%

• 0~+5W Positive Power Tolerance

• 12 Years Materials 25 Years Linear Output Warranty

• 10BB multi-busbar technology for greater efficiency

• Half-cut cells for higher power output

• Less shading loss

• ISO 9 001, CE, TUV, and SGS certified

• 144 half-cut monocrystalline cells

• A conversion efficiency of up to 20,87%

• Equipped with 158,75mm cells, generate up to 420W

• A multi-busbar design with 9 busbars

• Stable power output is ensured by positive power sorting

• A 15 years product warranty and a 30-year linear power warranty

Higher module efficiency and higher output power

Innovative half-cell and PERC technology

Better shade tolerance and reduced internal mismatch loss

High performance under low light conditions

TUV, CQC, and CE Certified

Harsh Environment Adaptability

Passed PID, fire, salt mist corrosion, and ammonia corrosion tests