Type: | Polycristallin |
---|---|
Gamme de Puissance: | Wp |
Région: | Taïwan |
No. de Modèle |
|
|||||
---|---|---|---|---|---|---|
Garantie | ||||||
Garantie | 10 Années | |||||
Garantie de Puissance | 12 ans à 90% de puissance sortie, 25 ans à 80% de puissance sortie | |||||
Caractéstique Electrique (STC) | ||||||
Puissance Maximal (Pmax) |
|
|||||
Tension à Puissance Maximal (Vmax) |
|
|||||
Courant à Puissance Maximum (Cmax) |
|
|||||
Tension Circuit Ouvert (Voc) |
|
|||||
Courant Circuit Court (lsc) |
|
|||||
Efficacité Module |
|
|||||
Conditions de Test Standard (STC): masse d'air AM 1,5, irradiation 1000W/m2, température des cellules 25°C | ||||||
Caractéristique de Température | ||||||
Gamme de Température | -40~85 °C | |||||
Coefficient Température (Pmax) | -0,4514 %/°C | |||||
Coefficient Température (lsc) | 0,052 %/°C | |||||
Caractéristiques Maximum | ||||||
Tension Maximale du Système | 1000 V | |||||
Caractéristiques Fusibles en Série | 15 A | |||||
Caracteristiques Matériel | ||||||
Dimension Module | 1640x992x40 mm | |||||
Poids | 19 kg | |||||
Type Cellule | Polycristallin | |||||
Numéro Cellule | 60 | |||||
Type de Verre | Tempéré | |||||
Type d'encapsulation | EVA | |||||
type de Trame | Aluminium Anodisé | |||||
Protection Boîte de Jonction | IP 65 |
During 2008 we installed 500 kWp of the TYN-220P6 model from this manufacturer and after 3 years of operation the results are very good. So far the power loss has been very low and we have not had any incidents. The manufacturer responds swiftly to supply the spare parts required for maintenance even if there are problems due to an effect not attributable to the solar panel itself.