WT 255P17

Wattrom
Prix:
A partir de €0,390 / Wp
Type: Polycristallin
Gamme de Puissance: 259,99 Wp
Région: Roumanie Roumanie
Remarque: Votre demande sera envoyée directement à Wattrom.

Produit Alternatif

LNSF-335M-350M

Luxen Solar Energy
A partir de €0,193 / Wp
  • Type Cellule: Monocristallin
  • Dimension Module: 1956x992x40 mm
  • Poids: 23 kg
  • Taille Cellule: 156×156 mm
  • Epaisseur du Verre: 3,2 mm
  • Pmax: 335 Wp
  • Vmpp: 36,3 V
  • Impp: 9,23 A
  • Voc: 44,2 V
  • Isc: 9,77 A
  • Efficacité: 17,26 %
  • Garantie: 10 Années
  • Garantie de Puissance: --

Caractéristiques du Produit

No. de Modèle
WT 255P17
Garantie  
Garantie 10 Années
Garantie de Puissance 12 ans à 90% de puissance sortie, 25 ans à 80% de puissance sortie
Caractéstique Electrique (STC)  
Puissance Maximal (Pmax)
259,99 Wp
Tension à Puissance Maximal (Vmax)
31,8 V
Courant à Puissance Maximum (Cmax)
8,428 A
Tension Circuit Ouvert (Voc)
38,1 V
Courant Circuit Court (lsc)
8,963 A
Efficacité Module
16,6 %
Tolérance de Puissance (+)
+ 1,6 %
  Conditions de Test Standard (STC): masse d'air AM 1,5, irradiation 1000W/m2, température des cellules 25°C
Caractéristique Electrique en NOCT  
Puissance Maximal (Pmax)
201,67 Wp
Tension à Puissance Maximal (Vmax)
29,89 V
Courant à Puissance Maximum (Cmax)
6,745 A
Tension Circuit Ouvert (Voc)
35,82 V
Courant Circuit Court (lsc)
7,173 A
Température
45±2 °C
  Température Nominale des Cellules (NOTC): 800W/m2, AM 1,5, vitesse du vent 1m/s, température ambiante 20°C
Caractéristique de Température  
Gamme de Température -40~85 °C
Coefficient Température (Pmax) -0,397 %/°C
Coefficient Température (Voc) -0,3166 %/°C
Coefficient Température (lsc) 0,0473 %/°C
Caractéristiques Maximum  
Tension Maximale du Système 1000 V
Maximum Courant Inverse 15 A
Caractéristiques Fusibles en Série 20 A
Caracteristiques Matériel  
Dimension Module 1657x998x38 mm
Poids 18,1 kg
Type Cellule Polycristallin
Taille Cellule 156×156 mm
Numéro Cellule 60
Type de Verre Tempéré, Traitement Anti-Reflet, Transparence Forte
Epaisseur du Verre 3,2 mm
Type d'encapsulation EVA
Type de Couverture PET
type de Trame Alliage Aluminium Anodisé
No. de Diodes Bypass 3
Protection Boîte de Jonction IP 65
Type de Connecteur Tyco Solarlock
Section Transversable du Câble 4 mm2
Longeur Câble 1000 mm
PDF  
Télécharger le PDF du Fabricant

Wattrom

27 Poporului Street, Constanta
Envoyer un message à ce fournisseur
Tritech Group is a Romanian producer of high efficiency polycrystalline photovoltaic panels. In 2015, the company invested in the construction of a modern factory. Located in Ovidiu City, Constanta Country, the factory provides the strategic advantage to be situated close to the A4 highway and the Constanta harbour.

The factory is equipped with professional production machinery, that ensures the highest quality of the produced solar panels. The acquisition and use of cutting-edge production machinery is, for our clients, the best warranty that we offer high efficiency photovoltaic panels. In the production process we use an ultra modern production line and ISO 9001:2008 and TUV InterCert Saar certified raw materials, in order to obtain high performances.

Tritech Group is photovoltaic panels producer holding a control and warranty technology of the products offered to our clients. Because we are focused on the high quality and long cycle life of our products, we decided to execute tests both of raw materials and of the manufactured photovoltaic panels. The testing is performed continuously, both visually and using some complex testing systems. The quality control is executed by trained responsible quality control people. The quality control executed rigorously throughout the all technological flow ensures that the manufactured photovoltaic panels meet the highest quality standards.

The manufactured photovoltaic panels are registered and marketed under the WATTROM brand. The Wattrom photovoltaic panels are CE marked.

In every step of production process, Tritech Group verifies the quality of manufactured WATTROM photovoltaic panels. Testing efficiency is a different step with high importance. We test efficiency of every WATTROM solar panels with a complex and modern system. The complex machinery offers synthetized information about tested solar panels. The resulted dates are recorded in our database. A sticker is automatically generated, printed with the results generated from testing. The sticker confirms the performance of each manufactured solar module, being easily read and understood by everyone.

Depending on our clients' requests, we can deliver polycrystalline photovoltaic panels of different sizes and yields. Also, we offer competitive prices on the intern market, but also on the foreign market.

Tritech Group is a reliable and flexible partner, able to satisfy its clients' most demanding needs.

Cristallin

Production (MW)/0: MWp
Polycristallin, Monocristallin
Gamme de Puissance(Wp): 250-300

Contacts Utiles

Contact Face
Mihaela Racovita

Plus de 6 séries de Wattrom

  • €0,390 / Wp
    WT 250P17
    254.99 Wp Polycristallin
  • €0,390 / Wp
    WT 250M17
    254.99 Wp Monocristallin
  • €0,390 / Wp
    WT 255M17
    259.99 Wp Monocristallin
  • €0,390 / Wp
    WT 260P17
    264.99 Wp Polycristallin
  • €0,390 / Wp
    WT 260M17
    264.99 Wp Monocristallin
  • €0,390 / Wp
    WT 300P17
    304.99 Wp Polycristallin