Accessoires d’installation
(232 Accessoires d'Installation Individuels)

• They replace the traditional, cumbersome assembly method of copper-aluminum tube crimping.

• The connector is followed by nut locking, with a quick-installation structure that connects copper and aluminum terminals directly.

• This enables fast and convenient copper-to-aluminum connections in photovoltaic power stations and similar applications.

• It can work with all kinds of trapezoidal metal roof

• It is a rail-less solution, it will help you save some cost and labor costs

• Use anti-aging EPDM rubber to improve the waterproof performance

• The single-axis and dual-row design is more economical and easier to operate and maintain.

• Adaptable to various terrains, with a maximum slope of 20%.

• Using LoRa wireless for data transmission results in a longer transmission distance and a more stable signal.

• Flame Retardant: Comply with the CPR Dca standards for reduced fire spread and smoke emission.

• Water Resistant: Possibility of intermittent, partial flooding by water.

• Halogen Free, E-Beam Crosslink XLPO, AD8 Direct Burial Optional, Anti-Termite.

• Fast installation in under one minute with proprietary welding technology.

• Quadruple-layer coating ensures corrosion resistance, lower cost, higher efficiency, and reduced TCO.

• Resistant to high temperatures, cold, and humidity, perfect for harsh conditions. Certified for 25 years of reliable operation.

• UV-resistant, radial humidity-resistant, flame-retardant, low-voltage cable.

• Especially suited for outdoor applications due to the very robust outer sheath.

• TÜV Rheinland 2PfG2642 /01.22 certified for protected, steel tape-armored aluminum cables, suitable for fixed underground installation.

• Fast installation in under one minute with proprietary welding technology.

• Quad-layer coating resists corrosion, ensuring stable electrical performance for 25 years.

• The potential difference between copper and aluminum accelerates the oxidation process.

• Pre-assembled to address complex connection issues before shipment.

• The SK4 Solar Connectors are TÜV Certified.

• It is low-smoke and halogen-free, making it suitable for various solar power applications.

• The cable effectively reduces the failure rate and operational costs of photovoltaic systems in the long term.

Les connecteurs solaires sont des connecteurs électriques à contact unique couramment utilisés pour connecter les panneaux solaires. Ils permettent de construire facilement des chaînes de panneaux en poussant les connecteurs des panneaux adjacents l'un vers l'autre.

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

Le sectionneur CC du panneau solaire est un dispositif de sécurité électrique qui peut se déconnecter manuellement des modules du système PV.

• E-beam cross-linked compounds

• High resistance against UV, ozone, and hydrolyzation

• High-temperature resistance, materials will not melt or flow

• Flexibility under cold conditions

• Long usable life, expected usable life over 25 years (90°C)

• Applicable to all common connectors

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

Connecteurs AC, principalement utilisés dans les terminaux AC des onduleurs, trois et cinq fils au choix, le produit a une forte résistance au vieillissement et aux UV, conformément aux exigences de l'utilisation des conditions environnementales extérieures difficiles,

connexion du câble à l'aide de vis de verrouillage pour un démontage facile.

• Test up to 1500V / 40A Systems

• Large Display Designed for Reading in Direct Sunlight

• Highest Rated PV Tester on the Market

• Record up to 999 Full Sets of String Data

• Rugged Case Designed for Continuous Site Work

• PV String Open Circuit Voltage Measurement Up To 1500 Vdc

• PV String Short Circuit Current Up To 25 Adc

• Data Transfer – Wireless Updates – Firmware Changes Via The PV: Sync Mobile App

• Internal Memory For Results Storage

• Manual Mode For Diagnostic Testing

• Metal casing with IP65 protection

• Suitable for PV systems under 1000/1500V DC voltage

• Supports one or more outputs

• Easy installation on walls

• Customized design

• High Efficiency

• Lower Heat Spot Risk

• Excellent Low-light Performance

• 0-3% Power Tolerance

• PID Resistant

• Resilient to Extreme Weather

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.